Table of Contents
Advertisement
Required setting:
Set "HDMI Audio Output" to "On" (
(The default setting is "On".)
≥ The HDMI connection supports VIERA Link "HDAVI Control" (
[BWT800] (VIERA Link "HDAVI Control" can only be used on the
connection from the HDMI (MAIN) terminal.)
When the unit is not to be used for a long time
To save power, unplug it from the household mains socket.
This unit consumes a small amount of power, even when it
is turned off
[approx. 0.2 W ("Power Save in Standby" is activated
and "RF OUT ( Aerial Signal )" is set to "Off")]
About HDMI cable
≥Please use High Speed HDMI Cables that have the HDMI
logo (as shown on the cover).
≥When outputting 1080p signal, please use HDMI Cables
5.0 meters or less.
≥Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50
(5.0 m), etc.
≥ You cannot connect this unit to DVI devices that are incompatible with
HDCP.
Depending on the device, images may not display properly or at all when
connecting with a DVI/HDMI switching cable. (Audio cannot be output.)
≥ If you are connecting to a TV that is only compatible with 2 channel
audio output, audio with 3 channels or more will be down mixed (
and output as 2 channels, even if connecting with an HDMI cable.
(Some discs cannot be down mixed.)
86).
≥Connect to terminals of the same colour.
72).
∫ Connecting with
SUB
115)
§
Connect the Set Top Box or video
equipment
AUDIO/VIDEO terminals
This unit's rear panel
R - AUDIO- L
VIDEO
S VIDEO
Audio/Video cable
(supplied)
R
L
AUDIO OUT VIDEO OUT
Set Top Box, etc.
If the unit is connected to the TV with the supplied
Audio/Video cable (
15), the optional one is required.
∫ Connecting with AUDIO
and S VIDEO terminals
This unit's rear panel
R - AUDIO- L
VIDEO
S VIDEO
§
R
L
AUDIO OUT
S VIDEO OUT
S Video cable
VQT3C14
13
Advertisement
Table of Contents
