Saving Processed Effects - Sony DPS-V55M Operating Instructions Manual

Editing a Program
Saving your Program
New programs created by changing effect blocks, effect structures, and effect parameters can be stored in memory for later
use. You can store up to 200 different user programs using program numbers 201~400.
1
Press SAVE to activate the save mode.
The program number starts blinking.
S a v e :
1 2 8
2
Turn the rotary encoder to select the
program number (201~400) where you
want to save the effect.
S a v e :
3 0 0
3
Press EDIT PARAMETER / to move the
cursor to the program name.
The first character of the current program name starts
blinking.
S a v e :
3 0 0
To switch back to the program number, press EDIT
PARAMETER ? to move the cursor back.
16
EN
S u p e r D e l a y
S u p e r D e l a y
S u p e r D e l a y
Display SAVE
EDIT PARAMETER ENTER
? / (TAP)
4
Turn the rotary encoder to select a
character.
S a v e :
3 0 0 X u
5
Use EDIT PARAMETER ? or / to move
the cursor into place for the next
character.
Repeat steps 4 and 5 to enter up to 12 characters.
6
Press SAVE again (or ENTER (TAP)) to
execute the save operation.
"Writing..." appears momentarily, the program is
saved, and the unit switches back to the play mode.
3 0 0 X M y P r o g r a m
F x A : 2 4 / F x B : 3 1
Rotary encoder
p e r D e l a y