English
6.7
Uploading recordings to a PC
Proceed as follows:
The following message then appears on your PC screen after a short time:
"Found new hardware".
If the camcorder is not detected, remove and reinsert the USB connector. You
can also try using a different USB socket on your PC.
You can then access the camcorder memory from your PC in the same way
as any other removable storage medium (USB stick, external hard disk etc.)
You can manage and edit your recordings with the "TotalMedia™ HDCam"
programme. The programme is provided on the CD supplied with the device
(refer to Section "5.6 Step 4: Install the TotalMedia™ HDCam software").
46
1. Connect the camcorder to
the PC with the supplied
USB-AV cable.
2. Switch the camcorder on by
opening the LCD monitor.
Silvercrest DV-5300HD