Ln/Act indicator will remain dark until the software processing is completed.
Remove the DFE-680TX
Follow these two steps to remove the DFE-680TX from its slot:
Step 1: Disconnect the Media Coupler Plug from the DFE-680TX
Unplug the media coupler from the DFE-680TX before ejecting the DFE-680TX from
the PC Card slot. The media coupler plug is held in place by small latching hooks at
either side of the plug. To remove the media coupler plug from the DFE-680TX, it is
necessary to unlatch the hooks by depressing the two small latch wings of the plug. Use
thumb and forefinger to squeeze the latch wings into the plug body and gently pull the
plug out of its receptacle.
10