Disconnecting Cable - Toshiba 2000 User Manual

2. Plug one end of the cable into the LAN's jack. Press gently until you hear the
latch click into place.
3. Plug the other end of the cable into a LAN hub connector. Check with your
LAN administrator before connecting to a hub.

Disconnecting cable

To disconnect the LAN cable, follow the steps below.
1. Pinch the lever on the connector in the computer and pull out the connector.
2. Disconnect the cable from the LAN hub in the same manner. Check with your
LAN administrator before disconnecting from the hub.
Figure 4-4 Connecting the LAN cable
LAN
4-7