Sony BRAVIA KDL-65HX729 Setup Manual page 16

An alternative way to secure the TV is with
an optional Sony Support Belt Kit. The
Sony Support Belt Kit is available as an
optional accessory, depending on your TV
model.
The length of the M6/M4 machine screw
differs depending on the rope or chain
diameter. Please refer to below illustration.
5-6 mm
~
Contact Sony Customer Support to obtain the
optional Support Belt Kit by providing your TV
model name.
• For United States call: 1-800-488-7669 or
visit: www.sony.com/accessories
• For Canada call: 1-877-899-7669
16
Machine
screw (not
supplied)
Rope or chain
(not supplied)
Screw hole on the
Table-Top Stand
Screw (not supplied)
Screw M6/M4
Rope or
chain
TV's
Table-Top
Stand
3
Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts,
wall anchor and chain (or rope).
Anchor bolts (M6) (not supplied)
Wall-
mount
holes
~
• Your TV is shipped with screws attached to the
rear of the TV depending on the TV model.
(They are fastened in the screw holes for wall
mounting.) Be sure to remove the upper two
screws prior to anchoring the TV on a wall.
• Securing the TV to the stand without securing
the TV and the stand to the wall provides
minimum protection against the TV toppling
over. For further protection, be sure to follow
the three measures recommended.
Rope or
chain
(not
supplied)
Wall-anchor
(not
supplied)