9-40 Upgrading Your Server
Floppy Disk Drive
Your server can contain an optional floppy disk drive.
Installation
1.
See the section "Preparing for Installation and Removal" described earlier to prepare.
2.
Remove the left side cover and front mask as described earlier in this chapter.
3.
Remove all the cables from the factory installed DVD-ROM drive and the devices
installed in the device bay.
4.
Remove the screws securing the hard disk drive bay.
5.
Pull out the file bay from the server with the release tabs on the both sides of the file bay
pushed.
Screw
Release tab
Release tab