Installation Of Carriage Drive Wire - Toshiba 2060 Service Handbook

1.7 Installation of Carriage Drive Wire

When the carriage drive wire is replaced, attach the new wire as shown:
Carriage drive wire
Pulley
1.7.1 Belt tension adjustment
(1) For this model, it is unnecessary to adjust the carriage drive wire tension.
1.7.2 Adjustment of carriage 1 and carriage 2
(1) Loosen the 3 screws fixing carriage-1 (2
screws) and -2 (1 screw in front) to the wire.
(2) While pressing carriage-2 against the exit side
frame (A & B), tighten the carriage-2 fixing
screws.
(3) Also while pressing carriages 1 and 2 against
the exit side frame (C & D), tighten the car-
riage-1 fixing screws.
Dec. 1996 © TOSHIBA CORP.
Carriage 1
Carriage 2
Pulley
(Rear side)
D
B
1 - 31
Tension spring
Scanning motor
Pulley
Carriage 1
Carriage 2
A
2060, 2860/70 ADJUSTMENT
Pulley
C