Zero Configuration Setup - D-Link DCS-933L User Manual

Section 2 - Installation
If you have a mydlink-enabled Cloud Router, you can take advantage of the Zero Configuration feature. Zero Configuration
automatically configures your camera's settings for you by adding the information to your mydlink account. This type of setup
allows you to set up your camera by simply plugging it in and connecting it to your router.
Connect your camera to your mydlink-enabled Cloud Router and Zero Configuration will automatically configure your DCS-933L
and add the camera to your mydlink account. With this quick and easy setup, you can remotely access your camera from the
www.mydlink.com website to manage and monitor your DCS-933L.
Connect the Ethernet Cable
Use the included Ethernet cable and plug it into the camera. Plug the other
end into an available port on your router. If you wish to use your camera
wirelessly, you will be able to remove the cable after Zero Configuration
Setup is complete.
Attach the External Power Adapter
Connect the power adapter to the power connector on your camera, then
plug the power adapter into a wall outlet.
D-Link DCS-933L User Manual

Zero Configuration Setup

10