Uplink Failure Detection information
Command: /info/ufd
Uplink Failure Detection: Enabled
LtM status: Down
Member
---------
port 20
* = STP turned off for this port.
LtD status: Auto Disabled
Member
---------
port
port
port
port
Uplink Failure Detection (UFD) information includes:
•
UFD status, either enabled or disabled
•
LtM status and member ports
•
Spanning Tree status for LtM ports
•
LtD status and member ports
Information dump
Command: /info/dump
Use the dump command to dump all switch information available from the Information Menu (10K or
more, depending on your configuration). This data is useful for tuning and debugging switch
performance.
If you want to capture dump data to a file, set the communication software on your workstation to
capture session data prior to issuing the dump commands.
STG
STG State
---
------------
1
DISABLED
10
DISABLED *
15
DISABLED *
Link Status
-----------
1
disabled
2
disabled
3
disabled
4
disabled
Link Status
-----------
down
Information Menu 71