HP -UX B6941-90001 Administrator's Reference Manual page 84

Installing ITO Agents on the Managed Nodes
General Installation Tips for Managed Nodes
also checked to make sure that it is running. If it isn't, all
standard locations are checked for the load xconsole
command. The configuration file of the primary IO Engine is
not searched.
• Checks for NetWare Management Agent (NMA)
The NMA agent is supported by the ITO agent for NetWare
server but this functionality requires NMA to be installed on
the selected NetWare servers; currently NMA installation is
not provided as part of the ITO agent for NetWare server
installation
• Checks for CLIB
The CLIB.NLM version is checked; version 4.10 or higher is
supported.
• Checks the disk space
• Checks the memory
The installation procedure knows how much memory in KB is
needed; this figure is subtracted from the NetWare server
parameter cache buffers. If the calculated amount is more than
30% of NetWare parameter total server work memory the
installation proceeds, otherwise the installation for the current
NetWare server is aborted, and the next selected NetWare
server is processed.
• Copies files
If the source file is a .NLM file, the installation checks if .NLM
already exists on the target NetWare system. If it does, the
NetWare depot server is checked to see what version is
available there. Later versions of .NLM are always copied from
the NetWare depot server to the target. Older versions of .NLM
are only copied to the target if you agreed to overwrite the
.NLM. It is recommended to use the default option, that is; not
to overwrite previous versions.
• Flags directories as 'purgable'
Deleted files occupy space although Novell NetWare can re-use
the space in a low disk quota situation. Deleted files can be
completely removed with the command-line utility PURGE. If a
directory is marked 'purgable' then each deleted file is no
longer kept by Novell.
84 Chapter 2