Description; Front Panel; Emphasis; Key On Data - GE MDS 4790M Installation And Operation Manual

26
Table 5. PC Commands—Radio Operation (Continued)

FRONT PANEL

PC COMMAND
DATAKEY [ON/OFF]

Key On Data

Details, page 33 Details, page 57
DATE [mmm dd yyyy]

Set Date

Details, page 33 Details, page 60
EMP [ON/OFF]

Emphasis

Details, page 34 Details, page 54
INIT
Details, page 35
MODEM [9600M,

Modem

MPT1411] Details, page 54
Details, page 36
NMASK [0000
0000–FFFF FFFF]
Details, page 36
PTT [0-255] Push to Talk Delay
Details, page 38 Details, page 55
RADIO [A/B/AUTO]

Radio Selection

Details, page 38 Details, page 61
REPEATER [ON/OFF]

Repeater Mode

Details, page 38 Details, page 56
RXMUTE RX Mute Mode
Details, page 39 Details, page 56
RX [xxx]

Receive Frequency

Details, page 39 Details, page 54
RXLEVEL [–20 to +3] Receive Level [–20 to
Details, page 39 +3]
Details, page 58
RXPAD [ON/OFF]

Receive Pad

Details, page 40 Details, page 58
RXTOT [NONE, 1-1440] RX Timeout [NONE,
Details, page 40 1-1440]
Details, page 56
SCD [0-255] Transmit Timeout
Details, page 40 Details, page 55
TIME [hh:mm:ss]

Set Time

Details, page 43 Details, page 60
TOT [ON/OFF, 1-255] Transmit Timeout
Details, page 43 Details, page 55,
Transmit Timeout Dura-
tion
Details, page 55
TX [xxxx]

Transmit Frequency

Details, page 43 Details, page 53
TXGAIN [ON/OFF]

Transmit Gain

Details, page 44 Details, page 58
TXLEVEL [–20 to +3, Transmit Level [–20 to
AUTO] +3, AUTO]
Details, page 44 Details, page 58
MDS 4790M (MPT 1411) I/O Guide
MENU
Toggle between key-on-data and key-on-RTS
ON=Key-on data
OFF=Key-on RTS
Set or display the current date
Enable or disable pre-emphasis and
de-emphasis
Set all operating parameters to default settings
Set or display the radio's modem type, or spec-
ify analog input
Set or display the minor alarm mask
Set or display PTT delay
Set or display the active transceiver board
Enable or disable repeater mode
Set or display RX (receive) Muting status
Set or display receive frequency
Set or display the analog audio receive level in
dBm
Enable or disable RX pad
Set or display the receiver timeout timer.
Set or display the soft carrier dekey delay
Set or display the current time
Set or display the timeout timer delay
Set or display the transmit frequency
Enable or disable TX gain
Set or display the analog audio transmit level in
dBm

DESCRIPTION

MDS 05-3628A01, Rev. B