Configuring Your Dap-1520 - D-Link DAP-1520 User Manual

Section 2 - Installation
Locate the Wi-Fi name (SSID) and password for your DAP-1520
device. This information is printed on the specification sticker
on the underside of the device. Using your computer or mobile
device's Wi-Fi connection utility, connect to the SSID of your
DAP-1520 and enter the password. If you are unsure of how
to connect to a wireless network, please refer to "Connecting
a Wireless Client" on page 37, or consult your device's user
manual. Once connected, you can begin the configuration
process.
There are two ways to configure your DAP-1520; using the QRS Mobile app on your smartphone or tablet device, or using the
web GUI on your computer.
For detailed information on either of the methods for configuring your DAP-1520, refer to the following sections of the manual:
• "QRS Mobile App Setup" on page 10
• "Web-based Configuration" on page 15
D-Link DAP-1520 User Manual

Configuring Your DAP-1520

9