Using Self-Timer Mode - HP PhotoSmart 945 User Manual

Using Self-Timer Mode

1
Secure the camera to a tripod or set it
on a stable surface.
2
Press the Timer/Burst
SELF-TIMER
appears in the active display.
3
Frame the subject in the active display.
4
The next steps depend on what you
are capturing:
1
Still Press the
picture (camera measures, then locks the focus and exposure).
The camera will hold these settings until it takes the
picture.
2
Press the
second countdown appears on the active display and
the Self-Timer light on the front of the camera blinks for
10 seconds before the camera takes the picture. If you
set
a few more seconds until the second picture is taken.
NOTE If you immediately press the
the way down without using
will lock focus and exposure just before the end of the
10-second countdown. This is useful when one or
more subjects will be entering the picture during the
10-second countdown period.
You cannot record audio when using the Self-Timer, but
you can add an audio clip later (see page 64).
1
Video Rotate the
clip
2
To start recording, press the
release it. A 10-second countdown appears in the
active display, and then the video will start recording.
3
To stop recording the video clip, press the
button again. or let it time out by itself (see page 29)
34
(
or
SELF-TIMER—2 SHOTS
Shutter button halfway down for
Shutter button all the way down. A 10-
SELF-TIMER—2 SHOTS
Mode
button until
)
, the Self-Timer light blinks for
Focus
selector to Video
Shutter
HP Photosmart 945 User's Manual
MF
Focus Lock
Shutter button all
Lock, the camera
mode.
button and then
Shutter