Reassembling The Unit; Positioning The Fixture - GE LED Spotlight User Manual

Reassembling The Unit:

4.
Once the base is secure,
insert the neck and fixture
back in to the large hole in the
middle of the base. Tighten the
screw on the base finger tight
so that the neck and fixture
assembly are secured snuggly
within. DO NOT OVER TIGHTEN.
turning clockwise (see photo). DO NOT OVER TIGHTEN.
To adjust the angle; firmly hold main light area and
twist to desired position.
NOTE: The neck and light will rotate and click
when moving to a different position.
7.

Positioning The Fixture:

5.
The LED Spotlight can be
rotated 360 degrees, up or
down. To adjust the light up
or down; turn winged screw
(see photo) counter clockwise,
move light to desired position
and tighten winged screw by
6.