Inserting/Replacing The Memory Card And The Battery Pack - Siemens HiPath 3000 Operating Manual

Inserting/replacing the memory card and the
battery pack
The handset comes with an approved battery pack and memory card.
Battery pack
The battery pack is not charged. It is first charged in the handset.
The Ex battery pack features special electronics. Gigaset M2 Ex profes-
sional detects whether an Ex battery pack or a normal battery pack is in-
serted. The handset will not switch on if a normal battery pack is inserted.
Memory card
The memory card is located under the battery pack. Phonebook and calen-
dar functions cannot be performed without the memory card.
The memory card contains the following data:
• Phonebook entries/redial list
• Calendar entries/appointments
You can transfer your memory card to a new Gigaset M2 handset if your
original handset is defective. This ensures you do not lose your data.
Notes:
• Note: Please observe the safety notes on the back cover.
• Ageing can diminish the battery pack capacity making it insuffi-
cient for the anticipated length of operation (discharging
speeds up over time). The battery pack must be replaced by
specially qualified technicians if this happens.
• Only use the approved battery pack (
• Open the battery compartment outside the Ex zone and in a
dust-free environment only.
• Your telephone directory entries and all settings remain stored
even if you remove the battery pack. The date and time settings
will be reset.
Putting the handset into service
Page 21).
17