Taking a SnapShot
Device Settings
Configuring IP and Firmware Settings
Document 800-07067 Rev C
11/10
HCD5MIH/X 720p True Day/Night Network Box Camera Reference Guide
The SnapShot function allows you to save an image from Live View to a default folder on
your computer (C:\Program Files\Honeywell Video Systems\Support\Snapshots). Files are
saved as: DeviceName_Date_Time.bmp. You are not asked for confirmation.
SnapShot is available to Administrators and Users with administrator and guest privileges.
The Device Settings tab allows you to view the network settings and firmware details of the
camera. It also allows you to restore to basic or full Factory Defaults, and to reboot a
camera.
Depending on the hardware installation, there is a tab called either Device Information or
Device Settings. In both cases, the IP and Firmware Settings panel mirrors the information
available in the Honeywell IP Utility. It provides read-only network settings, firmware
settings, and video formats without having to access the IP Utility.
The Device Settings are the same for the Primary and Secondary streams.
Figure 4-5
Device Settings
45