Sony NSP-1 Tutorials Manual page 8

Sony NSP-1 / BZNP-D1 Tutorials
6. Set up BZNP-D1
6.1 Install BZNP-D1 software
BZNP-D1 can be downloaded from www.sony.com/nsp1. BZNPD1 can control only one NSP1 unless a key
code is installed. A 10 players' key code comes with BZNPD1EXD. Install it as followings.
1. Launch BZNP-D1 software
2. Select Help / License settings from the menu
3. Click Add license
4. Type the key code and click OK
5. Click OK
Install Canopus ProCoder Express, if you purchased BZNPD1EXD. This software installs DirectShow
compatible MPEG2 codec software that is important to ingest MPEG2 video content.
6.2 BZNP-D1 GUI
6.3 Set up BZNP-D1
Following setups are required on BZNPD1 software before you do a regular operation.
•
Register NSP1
•
Create a group
•
Setup a group
•
Create a template
•
Assign NSP1 to a group
6.3.1 Register NSP1
1. Select Setup / Group Setup
2. Click "New NSP1"
3. Enter "NSP-A" at NSP1 name
4. Enter "192.168.0.1" at IP address
5. Enter "NSP1user" at Password and Retype
Password if those are blank
6. Click Check Connection if the NSP1 is online
7. Click OK
- 8 -