Setup The Transmitter; Main Menu - Bosch Integrus Operation Manual

Language Distribution System
* Note that after selecting 'Stereo' as input mode (step 14) the input number changes
automatically to the next even number (12), which is the input number of the left signal.
7.2

Setup the transmitter

The next sections give descriptions of the possible setup options. Each description is followed
by the relevant menu items with detailed information per menu option. The default values (see
section Reset all options to factory default values (4P), page 59) are indicated by an asterisk
(*) when applicable.
7.2.1

Main menu

The main menu contains the screens to the operational menus (see section Integrus
transmitter, page 69) and to the Setup sub-menu (see sections Set transmission (4A), page
52 and higher).
Bosch Security Systems B.V.
7. Turn to select the option value 'Per Channel ...'.
8. Push to go to the 'Channel' sub-menu (4C).
9. Turn to select the required channel number (11).
10. Push to confirm.
11. Turn to move the cursor to the quality option.
12. Push to confirm.
13. Turn to select the required quality value (Stereo PQ).
14. Push to confirm. *
15. Turn to move the cursor to the input number.
16. Push to confirm.
17. Turn to select the required input number (14).
18. Push to confirm.
19. Turn to move the cursor to the Main menu item number (4).
20. Push to confirm.
21. Turn to select the < Back screen.
22. Push to confirm.
23. Ready.
Operation manual
Configuration | en 51
2013.11 | V1.4 |