Installing the Honeywell IP Utility and Web Client Software
About the Web Client
User Profiles: Honeywell IP Utility and Web Client
Interface
Administrator/Admin
Honeywell IP
•
View the list of available network devices
Utility
and connect to the devices.
•
Configure the IP network settings.
•
Upgrade firmware.
•
Change the password to access the IP
Utility application.
•
Change the access passwords to the
web client application.
Web Client
•
View video and network settings.
•
Configure compression settings.
•
Configure camera setup.
•
Configure video analytics.
•
Configure audio and alarms.
26
The web client is the web-based application that enables users to:
•
View live-streaming video.
•
View the device network settings and firmware details.
•
Configure camera settings
•
Configure video analytics settings.
•
Configure compression settings.
•
Configure alarm and audio settings.
Both the Honeywell IP Utility and the web client have two user types: Administrator and
Guest as described in
Table
After the IP Utility software is installed, you can change the Administrator or Guest
passwords.
Table 3-1
User Profiles for Honeywell IP Utility and the Web Client
3-1.
Guest
•
View the list of devices available on the
network.
•
View system settings including device
name, IP address, and MAC address.
•
Guest users are limited to the Live View
tab where they can view video