Panasonic DBS Caller ID Installation And Operation Manual page 15

3. Set switches SW1 through SW8 on the L-TRK card
(VB-43511A) to OFF.
IMPORTANT: You must correctly set the
switches to prevent possible damage to
the L-TRK card. Also, the Tip and Ring
leads are polarity sensitive. Make sure
these are wired correctly.
4. Attach the Caller ID card to the L-TRK card.
Figure 2-2. Attaching Caller ID Card to the L-TRK Card
L-TRK Card
(VB-43511A)
5. Replace the cover on the L-TRK card.
Issued April 2000
Installation
Caller
ID Board
(VB-43551)
2-3