Deleting (Or Adding) Preset Channel; Auto Preset Again - Hitachi 13VR10B Owner's Manual

PRESET FOR USE

DELETING (OR ADDING) PRESET CHANNEL

The channels you no longer receive or seldom watch can be deleted from the
memory. (Of course, you can add the deleted channel into the memory
again.)
1 Select "CHANNEL SET UP"
Press MENU button repeatedly to point to "CHANNEL SET UP".
Then, press SELECT button.
2 Select "ADD/DELETE CH".
Press MENU button repeatedly to point to "ADD/DELETE CH". Press
SELECT button.
3 Enter the desired channel number
Press CH
control until your desired channel number appears. (Example: CH8)
4 Delete (or add) it from (into) memory
Press ADD/DELETE button. The channel number changes to light red. The
channel is deleted from memory.
To delete another channel, repeat steps [3] and [4].
If you press the ADD/DELETE button again, the channel is memorized again.
Added channel is in light blue.
Deleted channel is in light red.
5 Exit the channel setup mode
Press MENU button to return to TV mode.
NOTES:
• To confirm that channel(s) has been deleted or added, press CH
button.
• You can not operate this function in external input (AUX) mode.

AUTO PRESET AGAIN

or button repeatedly or number buttons on the remote
or
20