Channel List - Hitachi 42V52 Operating Manual

Channel
This function allows you to review which channels are labeled (CH ID), which have been added to Channel Memory
List
(SCAN), and which are protected by LOCK.
Chan. Manager
Ant. A
Channel Source
Antenna
Auto Channel Scan

Channel List

Select
Move SEL
Use the CURSOR button or
Press EXIT to quit the menu or select CHAN. MANAGER to return to the previous menu.
Scan
Chan. Manager
Ant. A
Ch# Scan
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
9 Off
Move SEL Return
Chan. Manager
Ant. A
Ch# Scan
[
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
9 Off
Move Set
To add (Scan-On) or skip (Scan-Off) additional channels while in Channel Manager, use the CURSOR button
channel number. Once the desired channel is highlighted, press the CURSOR button
CURSOR button or to select ON or OFF.
NOTE: Lock feature cannot be selected or set in Channel List.
Cable(1) Cable(2)
Start
to review more channels.
Use this feature after Auto Channel Scan is completed to add (On) or skip (Off) additional channels to
the remote control channel
CH ID Lock
--------
--------
--------
--------
--------
--------
--------
--------
CH ID Lock
]
--------
--------
--------
--------
--------
--------
--------
--------
Chan. Manager
Channel List
Ch# Scan
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
9 Off
Move SEL
or buttons.
Chan. Manager
Ant. A
Ch# Scan
[
2 Off
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
9 Off
Move Return
Chan. Manager
Ant. A
Ch# Scan
[
2 On
3 Off
4 Off
5 Off
6 Off
7 Off
8 Off
9 Off
Move Set
to move to the scan column, then press
46
CHANNEL MANAGER
CH ID Lock
--------
--------
--------
--------
--------
--------
--------
--------
Return
CH ID Lock
]
--------
--------
--------
--------
--------
--------
--------
--------
SEL Tune
CH ID Lock
]
--------
--------
--------
--------
--------
--------
--------
--------
or to highlight the