Antenna Hookups - Hitachi HTD-K160 Instruction Manual

Antenna Hookups

Antenna Hookups
Antenna Hookups Antenna Hookups Antenna Hookups
Connect the supplied AM / FM antennas for listening to the radio.
•
Connect the AM loop antenna to the AM terminals.
•
Connect the FM pigtail antenna to the FM 75-ohm coaxial terminal.
Note
•
To prevent noise pickup, keep the AM loop antenna away from
the system and other components.
•
Be sure to fully extend the FM pigtail antenna.
•
After connecting the FM pigtail antenna, keep it as horizontal as
possible.
Skill of connecting speaker wires
Push and hold Speaker terminal tab down to insert wire. Re-
lease tab to lock wire in terminal. Make sure the insulation is
completely removed from the ends of speaker wires at all
connection points.
16
FR
AUDIO
AUDIO
OUT
IN
L
R
AUX IN
If you have poor FM reception
Use a 75-ohm coaxial cable (not supplied) to connect the sys-
tem to an outdoor FM antenna as shown below.
Note
•
If you connect the system to an outdoor antenna, ground it
against lightning.
•
To prevent a gas explosion, do not connect the ground wire to a
gas pipe.
FL C SR SL
(8 )