Programming From Other Remote Controls (Learning) - Yamaha RX-A1020 Owner's Manual

Programming from other remote controls
SOURCE RECEIVER RECEIVER
SOURCE z
(learning)
SOURCE
AV AV
1 1 2 2 3 3 4 4
(China, Korea, U.K. and Europe models only)
5 5 6 6 7 7 V-AUX V-AUX
AUDIO AUDIO
1 1 2 2 3 3 4 4
The remote control of the unit can receive remote control signals
from other infrared remote controls and learn the remote control
PHONO PHONO MULTI MULTI USB USB NET NET
operation. If you cannot find a remote control code for your
TUNER TUNER
playback device or if any key on the remote control does not work
PARTY PARTY HDMI OUT HDMI OUT
MAIN MAIN ZONE 2 ZONE 2
after you register the remote control code, use the learning function
SCENE SCENE
to assign a function to each key.
1 1 2 2 3 3 4 4
BD/DVD BD/DVD TV TV NET NET RADIO RADIO
1
PROGRAM PROGRAM MUTE MUTE VOLUME VOLUME
External device
TOP MENU POP-UP/MENU
operation keys
ON ON
OPTION OPTION
SCREEN SCREEN
Menu operation keys
ENTER
2
RETURN DISPLAY DISPLAY
BAND
MODE MODE
External device
TUNING PRESET
operation keys
SUR. DECODE SUR. DECODE STRAIGHT STRAIGHT
MOVIE MOVIE MUSIC MUSIC
ENHANCER ENHANCER PURE DIRECT PURE DIRECT
INFO INFO SLEEP SLEEP
1 1 2 2 3 3 4 4
5 5 6 6 7 8 8
MEMORY MEMORY 3
9 9 0 0 10 10 ENT ENT
TV
TV operation keys
INPUT
TV z
TV VOL TV CH
4
MUTE CODE SET
CODE SET
Press CODE SET.
SOURCE blinks twice.
Perform each of the following steps within 1 minute.
Otherwise, the setting will be canceled. If this happens,
repeat from Step 1.
Press one of the following keys depending on the
type of your device.
For playback device: press the input selection key
(corresponding to the input jacks where the device is
connected).
For TV: press TV z.
Use the numeric keys to enter "9990".
Aim the infrared transmitters of the remote controls
at each other.
Remote control of external device
5 to 10 cm (2 to 4") apart
5
Perform the following steps within 10 seconds.
a On the unit, press one of the following keys to which you want to
assign a function.
For playback device: SOURCE z, menu operations keys,
external device operation keys
For TV: TV operation keys
b On the external device, press the key from which the operation is
learned.
Once the operation is learned successfully, SOURCE blinks
twice.
If it blinks six times, learning has failed. Repeat Step 5.
6
Repeat step 5 until all desired operations are
learned.
7
Press CODE SET.
SOURCE blinks once.
Note
• If you press RECEIVER in step 2, you can assign functions of an external
receiver to the menu operation keys, external device operation keys or
numeric keys. However, it makes these keys to control the unit impossible. If
you need to restore the remote control code for the unit, perform the following
steps.
a Press CODE SET.
b Press RECEIVER.
c Use the numeric keys to enter "9992".
CONFIGURATIONS ➤ Controlling external devices with the remote control
121
En