M1122 Administrator Manual
(Routing or NAPT routing or tunneling)
Bridging between interfaces connected to Bridge group. VBRIDGE
interface is the common IP interface for all bridge only interfaces
Bridge/
Bridge/
IP
LAN
VCC1
Figure 5-1
5.1.1 Routing/tunneling IP only
If the application requires only routing of IP packets, an IP address
should be configured for each interface in use. The example below
shows a typical configuration in such a case.
M1122> show conf running
eth
ip address 192.168.1.1 255.255.255.0
vcc1
pvc 0 101 ip-llc
ip address 10.98.16.1 255.255.255.0
M1122>
5.1.2 Routing/tunneling IP, bridging other protocols
When the application requires routing IP packets and bridging all other
protocols, then IP address has to be configured and bridging enabled
5-2
IP-HOST or IP-FORWARD-STACK
Bridge group
Bridge/
Bridge/
IP
IP
IP
VCC2
VCC3
Block diagram
E Copyright Nokia Networks Oy
Bridge/
Bridge/
Bridge/
IP
IP
IP
VCC4
VCC5
VCC6
Bridge/
Bridge/
IP
IP
VCC7
VCC8
MNGT
C33906001SE_00