Message Waiting Light On Another Telephone; Microphone Cut-Off - Toshiba 2000 series User Manual

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Message Waiting Light on Another Telephone

To set a message waiting light on another telephone
1. Press [DN] and dial
an internal number.
2. Press
3. Press
To cancel a message light set on another station
Press [DN] and dial

Microphone Cut-Off

This feature prevents callers from monitoring the sounds near your telephone when your
telephone receives a Handsfree Call or cuts-off the telephone microphone while on a
speakerphone call. When the feature is ON, the Microphn Cut-off LED lights steady red and
the Mic and Spkr LEDs do not light when your telephone is called. When the feature is OFF,
the Microphn Cut-off LED is not lit and your microphone works. The
functions on Handsfree Answerback and speaker OCA calls for privacy.
To turn the microphone ON/OFF
Press
Features
You hear ringback or busy tone.
or . The Msg or PhDN/MW] LED flashes
red at the called telephone. The Msg
LED lights steady red at your
telephone. The LCD displays the
station [203] where you set a message
waiting light.
. The Msg LED on your telephone turns
OFF. The Msg or [PhDN/MW] LED
on the called telephone flashes until
the called party presses the flashing
or [PhDN/MW].
plus the [PDN] or [PhDN] that has the message light set.
to toggle between ON/OFF.
Microphone Cut-Off
NO. 201
INT 203 MW SET
SENT 203
JAN 01 SUN 12: 19
49