Convenient Functions; Audio Cd Playback - Toshiba SD-260E E User Manual

Repeating a section between two specific points
(A – B repeat)
Press A-B RPT during playback at the point where repeat
play is to commence (A).
"A TO B SET A" is displayed on screen.
Press A-B RPT again at the point where repeat play is to
be concluded (B).
"A TO B SET B" is displayed and the repeat-play of the
selection between points A and B starts.
To return to normal play:
Press A-B RPT again. "A TO B CANCELLED" is displayed
and the A-B Repeat is disabled.
¥
NOTE:
• If you give up entering the point B after entering point A
simply press RETURN, and the operation is cancelled.

CONVENIENT FUNCTIONS

Displaying the time information
Press TIME during playback.
Each time this button is pressed, a different time information
box is displayed on the screen.
If "SINGLE ELAPSED" is displayed, the VFD display on
the unit shows the elapsed time for the track which is being
played.
If "SINGLE REMAIN" is displayed, the VFD display on the
unit shows the remaining time for the track which is being
played.
Displaying a scene with a larger and closer view
ZOOM function enables you to take a closer look at the
scene you are viewing.
This is especially useful when you are watching a science
fiction or an adventure film.
Press ZOOM during playback.
You can change the zooming ratio by pressing ZOOM
button several times.
¥
NOTE:
• You can move to any area of the enlarged screen by
3/4/6/5
using the arrow buttons.
To return to normal play:
Press ZOOM several times until "ZOOM OFF" is displayed
on the screen.

AUDIO CD PLAYBACK

Preparations
Turn on your audio system if the player is connected to an
audio system.
Basic Play
1. Press ON/STANDBY button.
2. Press OPEN/CLOSE ( ) to open the disc tray. .
3. Place a disc onto the tray
4. Press OPEN/CLOSE ( ) .
Play is commenced.
After operation
W hen the unit is not in use, remove the disc and press
ON/STANDBY to turn the unit to standby mode.
¥
NOTE:
• If the disc is placed upside down ( and it is a single sided
disc), TV screen will display either "NO DISC" or "DISC
ERROR".
For your reference:
"
W hen appears while a button is being pressed, it
means that the corresponding operation is prohibited by the
player .
Stopping Play
To stop the play permanently, press STOP (<) twice.
W hen the STOP (<) button is pressed once, a message
"PRESS PLAY TO CONTINUE" will appear on the screen to
remind you if you want to continue the play. To stop the play,
press the STOP (<) button again or you can press PLAY/
PAUSE to continue playback.
Fast Forward / Reverse
8
Press FWD or REV
The speed of advanc e or revers e changes for every
press of the FWD or REV button.
Normal play is resumed when PLAY/PAUSE button is
pressed.
¥
NOTE:
No sound will be heard during rapid advance or rapid
reverse.
Skip Forward / Backward
:
Press SKIP/STEP or SKIP
- 25 -
7
during playback.
9
during playback.
ENG