8933 NRX3_Brochure update.qxd 8/12/2003 2:03 PM Page 1 Business Telephone Range User Guide NRX-3 The display feature telephone for the corporate user Telephones of Distinction...
The telephone is pre-set at tone mode. 2.2 Tone or Pulse Option The NRX-3 telephone can be programmed to either Tone or Pulse dialing via the keypad. The procedure for programming this facility is as follows: Lift handset then enter:...
When the handset is replaced, the unit goes back to pulse dialing. 2.4 Programming Memory Buttons There are 20 memory locations in the NRX-3, which can be used to store your frequently used or important telephone numbers. The following is an example of storing a number in one of the locations: 1.
2.7 Setting the Clock All Clock Setting buttons are located under the memory label The Real Time Clock on your NRX-3 can be set to either 12HR or 24HR format. To set to 12HR format - Lift Handset then enter:...
MODEM. 2.13 Message Waiting The NRX-3 has a built in LED and neon lamp for message waiting indication. This is compatible with various PABX systems providing such features. Different types of...
Press the ‘Pause/LRN’ button 2.19 Adjustable Volume Callers Voice At the right side of the NRX-3 there is a slide control which can be used for adjusting the speech volume level of the called party’s voice in all three modes of operation –...
2.22 Hearing – aid compatibility The handset receiver is hearing aid compatible. 3. WALL-MOUNTING THE UNIT The NRX-3 can be wall mounted using the wall mount bracket installed on the bottom of the unit. ● Dismount the wall mount bracket from the unit ●...