TG9391_QG(e).fm Page 6 Thursday, July 3, 2008 9:25 AM
Quick troubleshooting
2 No dial tone is heard from handset.
See if "Check tel line 1" or "Check tel line 2" is shown on the handset display.
Displayed
Lift up the handset from the charger.
Press {C} at the handset, then check if the display shows
"Talk".
1
1
No link to base.
Reconnect AC
adaptor.
Check if the
telephone cord is
properly connected
to both the base
unit and telephone
line jack on the
wall.
Still displayed
Try to connect your
telephone into a
different line.
Still displayed
Your telephone may need service.
Please visit http://www.panasonic.com/help for further troubleshooting.
Not displayed
"No link to base.
Reconnect AC
adaptor."
is displayed.
Press {s} , then check if the dial tone
is heard from the speaker on the back.
No dial tone
Try remedy for 1
on previous page.
– 6 –
L1
1
Talk
Line1
"Talk" is displayed.
00-00-00
=Volume
dB
MUTE
MENU
LINE
2
2
Dial tone is heard.
Your telephone may need
service when only back
speaker provides a dial
tone.
{C}
{s}