Table of Contents
Advertisement
11.3 Display signal of AV device
•
With an A/V cable (not supplied) you can connect A/V
equipment, such as an external DVD player.
•
Connect the video and audio connectors to the VIDEO IN/OUT
(7) and AUDIO IN/OUT OPTICAL OUT (8) jacks on the DVD
player.
•
Connect the RCA connector to the corresponding colour-coded
jacks on your TV set.
•
Press MODE (16) on the DVD player and, using
(15) or (14), select AV IN mode on the unit.
•
Now you will receive the signal of the external DVD player.
11.4 Connect digital amplifier
•
With an optical digital cable (not
supplied) you can connect the DVD
player to a digital amplifier.
•
Connect the digital cable to
AUDIO IN/OUT OPTICAL OUT
(8) on the DVD player and to
the optical digital input of your
amplifier.
Note:
•
Depending on the connected amplifier, select SPDIF/RAW or
SPDIF/PCM in the setup menu under Audio Setup (page 40).
20
Hide quick links:
Advertisement
Table of Contents
