Table of Contents
Advertisement
English
To enable the speed limit warning:
1.
Tap the Enable Warner checkbox. A checkmark will
appear in the checkbox.
2.
In addition to the optical warning you can also
enable an acoustic warning. To do this, tap the
Warning tone checkbox.
To disable any of these functions, tap the
i
corresponding checkbox again. The
associated checkmark will be removed.
3.
Next select a tolerance value. When exceeding this
tolerance the warning will be output. To do this, tap
the desired button:
32
Navigation Device PNA-M4310
Triggers the warning when exceeding
the speed limit by 5 km/h.
Triggers the warning when exceeding
the speed limit by 10 km/h.
Here you can set a custom tolerance
value (see page 34 – Manual Input).
4.
After you have entered all information tap this
button:
5.
You are returned to the General Settings menu.
Change any further settings or tap
return to the main menu.
again to
Advertisement
Table of Contents
