Installation; Safety Instructions For Installation - Miele EGW 2060 Operating And Installation Instructions

Installation

Safety instructions for
installation
Before connecting the appliance to
the mains supply make sure that
the voltage and frequency correspond
to the rating on the data plate,
otherwise the appliance could be
damaged.
Consult a qualified electrician if in
doubt.
The socket and on-off switch
should be easily accessible after
the appliance has been built in.
The plate warmer may only be built
in in combination with those
appliances quoted by the manufacturer
as being suitable. The manufacturer
cannot guarantee trouble-free operation
if the appliance is operated in
combination with other appliances.
When building in the plate warmer
in combination with another
appliance, the plate warmer must be
fitted above a fixed interim shelf.
Ensure that the shelf / housing unit can
support both its weight and that of the
other appliance.
As the combination appliance is
fitted directly on top of the plate
warmer once it is built in, an interim
shelf is not necessary between the two
appliances.
When building in the combination
appliance, it is essential to follow
the instructions given in the operating
and installation instructions supplied
with it.
16
This equipment may only be used
in mobile installations such as
ships, caravans, aircraft etc. if a risk
assessment of the installation has been
carried out by a suitably qualified
engineer.
All dimensions in this instruction booklet
are given in mm.