Selecting Stereo / Sap / Mono; Using The Off-Timer - Panasonic TU-PTA500U Operating Instructions Manual

Selecting STEREO / SAP / MONO

Press the MENU button to display the MENU screen and select ADJUST.
CH
ACTION
VOL
CH
CH
ACTION
VOL
CH
MENU

Using the OFF-TIMER

1
OFF TIMER
The Wide Plasma Display may be preset to switch to stand-
by after a fixed period. The setting changes to 30 minutes,
60 minutes, 90 minutes and 0 minutes (off timer cancelled)
each time the button is pressed.
30
When three minutes remain, "Off timer 3" will flash. The off timer is cancelled if the main supply fails.
Notes:
•
When power to this unit set is disrupted due to a power outage or similar problem, after power is restored, the off-
timer will be deactivated and this unit will be in standby mode.
•
To see the remaining sleep time, press the INFO/RECALL button.
(Except in PC input mode)
Press to select AUDIO MODE.
VOL
Press to display the AUDIO MODE screen.
Press to select STEREO / SAP / MONO.
Red display : With signal
White display : No signal
VOL
: MONO
Press to end.
Helpful Hints:
•
STEREO - Two channel Audio reception.
•
SAP - Second Audio Programming (typically
used for bilingual audio).
•
MONO - Use when stereo signal is weak.
Press the OFF TIMER button to
display the OFF TIMER screen.
60 90
0
MENU
ADJUST SET UP
PICTURE
PICTURE ADJUST
POSITION / SIZE
AUDIO
SOUND ADJUST
AUDIO MODE
PAGE ACTION SELECT
EXIT
AUDIO MODE
AUDIO MODE
STEREO SAP MONO
CHANGE
EXIT
OFF TIMER 90
45