Using The Camera; Connecting The Camera - Silvercrest KH 2342 Instruction Manual

IB_KH2342_V5877_UK_V3.qxd

4. Using the camera

Connecting the camera

1. Insert the USB plug e of the camera into the USB connector on
your notebook.
The hardware recognition now runs.
2. Follow the instructions on the monitor.
• If necessary, during the installation of the hardware select "Install the
software automatically".
• Should a message about the Windows-Logo-Test appear, ignore it
and click on "Continue".
3. When the hardware recognition is complete, the camera is ready
for use and can be used with the software that you already use
for video-chatting or video recording.
Using the camera
Note:
Before taking the camera into use remove the lens cover w from
the camera.
You can start the camera by two methods:
• Press the snap-shot button q on the camera
or
• In the start menu select under "PROGRAMMES" the entry "USB PC
Camera Plus". In the dropdown menu click on "AMCap".
The camera programme AMCap is opened. After a short time the camera
view appears.
• Align the direction of the camera by means of the swan neck r.
18.07.2007 9:39 Uhr
- 6 -
Seite 6