LG FREEZER Owner's Manual page 47

6. Procedure to install
15. Loosely fix the top bracket
depth gap between the integrated door panel and the front of the cabinet to 4mm. At this
time, adjust the location of the integrated door panel so as not to touch or make contact
with the face of the cabinet when opening/closing the door.
16. Use the spanner
17. If the dimension is not correct, loosen the height adjusting nuts
and the wood screw
18. Place the depth adjusting bracket
(two spots), and fix with the top bracket screws
Secure the height adjusting nuts
with the height adjusting nuts
to check the dimension. (See Figure 14)
, and repeat the work starting from Step 12.
as shown at the figure, fix it with the bracket screw
to fix the top bracket
(Figure 13), and adjust the
, the door screw
(four spots). (See Figure 15)
.