Electrical Connections; 3-Wire Branch Circuit - Bosch HBN456AUC Installation Instructions Manual

ELECTRICAL CONNECTIONS
This appliances is manufactured with a green
GROUND wire connected to the oven chassis.
After making sure that the power has been turned
off connect the flexible conduit from the oven to
the junction box using a U.L. listed conduit con-
nector. Figures A and B and the instructions pro-
vided below present the most common way of
connecting the ovens. Your local codes and ordi-
nances, of course, take precedence to these in-
structions. Complete electrical connections ac-
cording to local codes and ordinances.
3-WIRE BRANCH CIRCUIT
Refer to Figure A, where local codes allow the
connection of GROUND wire from the oven to
the branch circuit NEUTRAL wire (grey or white
colored wire):
• If local codes permit, connect the green
GROUND wire from the oven and the white
wire from the oven to the branch circuit NEU-
TRAL wire (grey or white colored wire).
• Connect the red and black leads from the oven
to the corresponding leads in the junction box.
Junction box _ CaNe from
_er Grounded Neutram
suppUy
Whitewires Red wires. _ __
Bare o_
_ "BHack wires
CaMe _ U.L.-Iisted conduit connector
from oven
Figure A.
4-WIRE BRANCH CIRCUIT
Refer to Figure B:
• Connect the green GROUND wire from the
oven to the GROUND wire in the junction box
(bare or green colored wire).
• Connect the red and black leads from the oven
to the corresponding leads in the junction box.
• Connect the white wire from the oven to the
NEUTRAL (grey or white) wire in the junction
box.
Junction box CaNe from
_-_. power suppHy
White wires
Ungrounded Neutram
BHack wires
Bare or green wures CabHe _.
from oven _ U.LMisted conduit connector
Figure B.
10