Hdstb Setup; Av Out Setup - LG 52DC2D Owner's Manual

HDSTB Setup

HDSTB Setup
- This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital
signals from a digital set-top box or other digital external device, refer to the figure as shown below.
- This TV supports HDCP (High-bandwidth Digital Contents Protection) protocol for Digital Contents (480p,720p,1080i).
How to connect
Use the TV's COMPONENT (Y, PB, PR) INPUT, RGB, HDMI/DVI jack for
video connections, depending on your set-top box connector. Then, make
the corresponding audio connections.
Note: HDMI(High Definition Multimedia Interface): Input that accepts uncom-
pressed digital signal and multi channel digital audio signal.
How to use
1. Turn on the digital set-top box. (Refer to the owner's manual for the digital
set-top box.)
2. Use INPUT on the Remote Control to select Component 1, Component
2, RGB-DTV or HDMI/DVI source.
A V Out Setup
A V Out Setup
The TV has a special signal output capability which allows you to
hook up a second TV or monitor.
Connect the second TV or monitor to the TV's AV OUT. See the
Operating Manual of the second TV or monitor for further details
regarding that device's input settings.
Note
• Component, RGB-PC/RGB-DTV, HDMI/DVI, DTV input sources
cannot be used for AV out.
16 DLP Projection TV
Signal Component 1/2
480i Yes
480p Yes
720p Yes
1080i Yes
AV IN 1 AV OUT
VIDEO
(L)
(L)
AUDIO
MONO
(R)
(R)
DIGITAL AUDIO
OPTICAL OUT
S-VIDEO
HDMI
/DVI IN
RGB-DTV,HDMI/DVI
No
Yes
Yes
Yes
S-VIDEO
IN
(R) AUDIO (L) VIDEO