Key Lamps - Hitachi SelecSet 900 Series User Manual

K L
EY AMPS

Key Lamps

About key
lamps
1-20
Key lamps (LEDs) are provided for the following keys on
your SelecSet phone:
• CAPs
• Programmable keys
• Fixed keys (except DISC)
These key lamps indicate the status of the key, informing
you as to whether the line or feature is in use.
describes the meanings of the lamp indications. Not all
features invoke all indications, and your programmed keys
may not exhibit all of the indications described here.
Table 1 Lamp status indications for autodial keys
This status...
Dark
Steadily lit
Slow flashing
Fast flashing
Very fast
flashing
In some cases, you may see a steady green LED lamp
indication. This is only used for F-lines and private lines.
It indicates that you are successfully connected to an
F-line or a private line. See
Functions" on page 3-21.
S
Indicates this...
Key is not in use
Key is in use. Either an active call is in
progress at the key or a feature has
been activated by the key
A call is on hold at this key
A call is waiting at this key.
A call has terminated at this key with
priority ringing.
"Key Group 1A2 Emulation
HCXTD850, Rev. A02, September 2001
S 900 U
ELEC ET SER
Table 1
G
UIDE