Philips GoGear audio video player SA054 Quick start guide Install Connect and Charge Transfer Enjoy...
Page 2
Need help? Please visit www.philips.com/welcome where you can access to a full set of supporting materials such as user manual, the latest software upgrades and answers to frequently asked questions.
Contents Is there a manual? 12 Troubleshooting Register your product How do I reset my player? 12 Need help? Don’t forget about upgrades 12 Disposal of your old product What’s in the box Overview of controls and connections Install Connect and charge Connect to PC Read the battery level indication of your player...
You have a detailed user manual and FAQ on the CD by-packed with your player. You can also download the same file from this website: www.philips.com/support Register your product Since it is possible for you to upgrade your product, we recommend that you register your product on www.philips.com/welcome...
What’s in the box USB and AV cable Headphones CD-ROM Quick start guide What else you'll need: A computer with: Windows 2000, XP or Vista Pentium III 800MHz processor or higher CD-ROM drive 128 MB RAM 500MB Hard Disk space USB Port Computer Internet connection (preferable)
Overview of controls and connections A OPTIONS Offers a selection of options, depending on the current menu B -VOLUME+ Increases/decreases volume (hold to increase/decreases fast) Skips back (hold to quick skip) Skips forward (hold to quick skip) Scrolls up/down (hold to quick scroll) d y / 2;...
Install Insert the CD supplied with your product into the CD ROM drive of your PC. Follow the on-screen instructions to complete the installation of Philips device Manager. Connect and charge Connect to PC When you connect the player to the PC, it automatically charges.
Read the battery level indication of your player The approximate power levels of your battery are indicated as follows: Full Two-thirds full Half full Empty Note When the batteries are almost empty, the battery screen blinks. The player saves all settings and unfinished recordings and switches off in less than 60 seconds . Transfer The player appears as a USB mass storage device in Windows Explorer.
Enjoy Turn on and play To turn on, press until the display shows the Philips logo. y/2; To turn off, press and hold until the display shows ‘Bye’. y/2; Main menu Music Play digital music tracks Video Watch videos Pictures...
Music mode (also play mode for recordings) The player offers the following music mode options: Goal Action Goal Action Play / Pause music Return to browsing menu Press Press Skip to next audio file Press Increase volume Press Vol + Return to previous audio file Decrease volume Press...
Connect the mini USB plug with the player. Connect the red, blue, and green/yellow component plugs of the supplied cable with the component jacks on your TV. On SA054, Settings > desplay settings > TV-out signal. Press or 4, then to select Component video (YUV).
Radio From the main menu, select to enter radio mode. Connect the headphones The supplied headphones serve as a radio antenna. Ensure you connect the headphones properly for an optimal reception. Auto tune From the Radio menu , select Auto tune. The radio automatically tunes radio stations and saves the frequencies to presets.
Recordings You can record audio with the player. Make recordings From the main menu, select Press to select the Start voice recording, then to start. The player records and shows the recording display. > Press to pause. Press to stop and save the recording. Your recordings are saved in the Recordings library on the player.
Page 14
Manager to recover your player: Launch the Philips device Manager at Start > Programs > Philips digital Audio Player > SA054 > Philips SA054 device Manager on your PC. Turn off your player.