Switching Off The Refill Indicators - Miele for dishwashers Operating Instructions Manual

Switching off the refill indicators

If you only ever use combination
products containing salt and rinse aid
in your dishwasher, you can disable
both of these refill indicators if you wish.
^ Switch the dishwasher off using the
On/Off button K.
^ Press the Start/Stop button in and
whilst holding it in switch the
dishwasher on using the On/Off
button K.
Keep the Start/Stop button pressed in
until the Start/Stop indicator light
comes on.
If this does not happen, start the
procedure again from the beginning.
^ Press the Delay start button 9 times.
The Delay start indicator will flash
briefly nine times at intervals.
Before using for the first time
The characters flashing in the display
will show whether the refill indicators
are switched on or off.
– "p 1": the refill indicators are switched
on.
– "p 0": the refill indicators are
switched off.
^ If you want to change the setting,
press the Start/Stop button.
The setting is now stored in memory.
^ Switch the dishwasher off using the
On/Off button K.
If you switch to using detergent that
does not contain salt or rinse aid, it
is important to remember to
replenish the salt and rinse aid and
to switch the refill indicators back
on.
25