Appendix A - Instruction For Mounting The Handle - Electrolux CS 110 Installation & Operating Instructions Manual

appendIx a - InstructIon for mountIng the handle

staInless steel doors
1) Remove the door gasket behind the
two holes adapted for the handle. Start
in the upper corner and gently pull
out the gasket from the slot. Continue
down and pass the two holes.
2) From the inside of the door, put the
two attached screws (M4x60) first
through the door frame (1), then
through the distance bar (2) and then
tap the screw into the threads in the
vertical handle bar (3).
3) Remount the door gasket by pressing
it back in its slot by hand. Make sure
that the gasket is all the way back in
place of origin.
CAUTION
do not use any sharp tools to force the
gasket back. this can damage the gasket
and the wine cellar will loose performance.
2
1
3
- 7 -
screw