For Fax/Did - Siemens HiPath 1100 User Manual

Step by step
p
Enter the number for the
1. extension you want to call (e.g., 11/101).
2. UCD subscriber group for voice mail (e.g., 790).
3. Call group (e.g 770)
4. Access to an external line (e.g., 0) and the external
destination number.
w
Wait for a confirmation tone.
t
Replace the handset.

For Fax/DID

When a Fax/DID module is installed, calls can be for-
warded to Auto-answering mode.
n
Lift the handset.
p
Enter the type of call forwarding wanted:
qee
1.
qeh
2.
p
Enter the call forwarding destination number.
khd
1.
khe
2.
khf
3.
khg
4.
w
Wait for a confirmation tone
t
Replace the handset.
[1] For further information about the Fax/DID module, see Fax/DID
Auto-answering mode in the Programming manual.
Functions used for receiving calls
1
- Direct call forwarding
- Call forward no answer
- FAX
- Attendant (direct dialing to extension)
- Fax/DID
- Message
43