Chapter 2 Basic Operation
2.1 Powering On and Off
■
To switch to OFF
Turn the PSU switch of the power supply unit to the OFF position (marked "O").
For normal operation, there is no need to switch to OFF position.
Figure 2.6 OFF position (marked "O") of the PSU switch on a power supply unit
Drive enclosure
Controller enclosure
Check that the POWER LED of the power supply unit is off.
2.1.3
Powering On
This section explains how to turn on the ETERNUS DX Disk storage system.
The following methods can be used to turn the power on:
•
Via the Power switch
Press the Power switch to turn on the ETERNUS DX Disk storage system.
•
Via the power synchronized unit
Use the power synchronized unit to turn on the ETERNUS DX Disk storage system.
•
Via the Wake On LAN function
Use the Wake On LAN function to turn on the power.
ETERNUS DX80 S2/DX90 S2 Disk storage system User's Guide -Operation-
Power Supply Unit PSU#0
36
Copyright 2013 FUJITSU LIMITED
Power Supply Unit PSU#1
P3AM-4842-12ENZ0