Checking An Alarm Transmitter - Bosch NurseCall Main Unit User Manual

NurseCall Main Unit
The unit goes then back to the alarm transmitters menu.
NOTICE!
To program the maximum number of alarm transmitters (300 or 500), see
Section 4.4.9 Maximum number of alarm transmitters, page 37 .
4.5.3

Checking an alarm transmitter

1.
¯ Transmit. type : 0
Alarm Transmitter
2.
3.
¯´ Press Radio
4.
¯ Transmitter code
XXXX is the ID code of the transmitter.
The transmitter's location is displayed. The following example is for a floor/room/bed display:
¯ Floor
Value:
5.
¯ Room
Value:
6.
¯ Bed
Value:
7.
¯ Pager
Value:
8.
Bosch Security Systems
Select the alarm transmitter type with
Confirm with .
OK:Program
0:Erase ¤:Info
Press to check the transmitter.
Button
Press the button of the transmitter.
XXXX accepted
001
Press to see the room value.
012
Press to see the bed value.
1
Press to see the pager value.
00
Press . The unit then goes back to the alarm transmitters menu.
and
£
User Manual
Programming | en
.
F.01U.252.699 | V1.1 | 2012.01
39