Replacing The Light Bulbs - GE Profile 28 Owner's Manual

Replacing the light bulbs.

Turning the control to the OFF position does not remove power to the
light circuit.
Fresh Food Compartment—Two Lower Lights
Freezer Compartment
22
Fresh Food Compartment—Upper Light
1 Unplug refrigerator.
2
Pull off the temperature control knobs.
3 To remove the light shield, pull it straight out.
After replacing with an appliance bulb of the same or lower
wattage, reinstall the light shield and plug the refrigerator back in.
These lights are located behind the top drawer.
1 Unplug the refrigerator and remove the top drawer and cover.
2 Grasp the bottom of the light shield and pull it forward and up
to free its bottom edge.
After replacing with an appliance bulb of the same or lower wattage, reinstall the
light shield, drawer and cover, and plug the refrigerator back in.
1 Unplug the refrigerator.
2
Remove the shelf just below light panel.
3 Pull the plastic light panel, which is underneath the ice
compartment, toward you.
After replacing with an appliance bulb of the same or lower wattage, reinstall the
panel and shelf, and plug the refrigerator back in.
(on some models)