Brother ADS-1000W Quick Setup Manual page 10

Wireless Network
g
Choose your machine from the list, and then
click Next.
NOTE
If your wireless settings fail, the Wireless Device
Setup Wizard screen appears. Follow the
on-screen instructions to complete the wireless
configuration.
h
The installation of the Brother drivers will
automatically start. Please wait for the software
to install.
10
NOTE
• (ADS-1000W)
You can find your machine's MAC Address
(Ethernet Address) in Network Status from the
Network tab, and IP address in TCP/IP
(Wireless) in Wireless from the Network tab,
in Web Based Management. See How to
Configure the Machine Settings Using Web
Based Management (Web Browser) in the
Network User's Guide.
(ADS-1500W)
You can display your machine's MAC Address
(Ethernet Address) and IP Address using the
machine's LCD. To find the MAC Address,
press (Settings) > Network > WLAN >
MAC Address. To find the IP Address, press
(Settings) > Network > WLAN >
TCP/IP > IP Address.
• If the Setup Network "Scan to" name screen
appears, type a name for your Macintosh (up to
15 characters), and then click Next.
The name you type will appear in the
Destination drop-down list in Scan to
Network Device from the Scan tab in Web
Based Management (ADS-1000W only)(see
Save Scanned Documents on Your Computer
in the User's Guide) or on the LCD of the
machine (ADS-1500W only) when you choose
a scan option. For more information, see Scan
from the Control Panel of the Machine in the
User's Guide.
The installation is now
Finish
complete and it is time to
do a test scan. See Test
Scan (scan to PDF) on
page 18.
To install optional applications:
Now go to
Page 17
Macintosh