Epm 3710 Meter - GE EPM 7300 Installation Manual

EPM 3710 Meter

Display Indication
A
B
C
*
A,
B,
C,
*,
80
The large faceplate representation of the EPM 3710 provides the following animated
functions:
Feature Function
Display Opens the tabular data window specified during wizard
Window configuration and sets the view to the Monitoring page.
MIN/MAX Open the tabular data window specified during wizard
Buttons configuration and set the view to the Setup page.
PHASE Rotates the left side of the display through eight sets of
Button instantaneous values, as described in the table below.
FUNCTION Rotates the right side of the display through 13
Button accumulated values.
Table 7. EPM 3710 Faceplate animated functions.
The parameters displayed by the PHASE button are listed in the following table.
The parameters displayed by the FUNCTION button are listed in the following table.
If any of the import or export values are zero, they are not displayed and the next
nonzero value is shown. When any of these parameters are displayed, the AMPS
portion of the display window is used to allow display of the complete value.
Parameters
Phase A current and line-to-neutral voltage
Phase B current and line-to-neutral voltage
Phase C current and line-to-neutral voltage
Average current and line-to-neutral voltage
Phase A current and A-B line-to-line voltage
Phase B current and B-C line-to-line voltage
Phase C current and C-A line-to-line voltage
Average current line-to-line voltage
PMCS Interface Toolkit