Quick installation and setup overview
Install the UPS Network Module
1.
network settings.
Access the web interface.
2.
Configure the power fail settings using the Shutdown Parameters screen (on page 35).
3.
(optional) Configure additional settings using the menus under Settings (on page 29).
4.
Install and configure the HPPP Client on all servers to be protected by the UPS. After all Clients are
5.
configured at the servers, they are automatically added by the UPS Network Module and appear on the
Notified Applications screen (on page 42).
For more information, see the HP Power Protector User Guide on the HP website
(http://www.hp.com/go/rackandpower).
("Installing the UPS Network
Module" on page 12) and configure the
Introduction 10