Snmp Settings Screen - HP Integrity Superdome 2 16-socket User Manual

Device list
Column
Bay
Enabled
EBIPA Address
Autofill
Current Address
Device Type

SNMP Settings screen

The Onboard Administrator supports SNMP Version 1 and several groups from the standard MIB-II
MIB. Additional information about the enclosure infrastructure is available in the HP Rack Information
MIB. CPQRACK-MIB, which is part of the Insight Management MIBs, is available on the Management
CD in the Superdome 2 Essentials Foundation Pack.
The SNMP Settings screen enables you to enter system information and community strings and
designate the management stations that can receive SNMP traps from the Onboard Administrator.
If you select Enable SNMP, then the Onboard Administrator responds to SNMP requests over UDP
port 162. Port 162 is the standard UDP port used to send and receive SNMP messages.
System Information settings
In the System Information subcategory, information about the Onboard Administrator SNMP system
can be enabled and configured.
94 Configuring HP Integrity Superdome 2 compute enclosures and enclosure devices
Description
The bay in the enclosure of the device.
Enables EBIPA settings for the device bay. EBIPA settings for all device bays can be enabled
by selecting the check box next to Enabled in the heading row or individual device bays can
be selected by clicking the check box for that particular device bay.
The static IP address you want to assign to the device bay.
Assigns consecutive IP addresses for the selected device bays below in the device list. Click
the autofill down arrow to assign the IP addresses.
The current IP address of the device bay.
The type of device installed in the device bay.